![]() |
Sanding after the first round of filler. The filler had a few air pockets in it that came out uneven after sanding. The edges also had a small noticeable edge. |
![]() |
Applied 2nd round of filler and let it sit over night. |
![]() |
Stripped the frame down as much as necessary to make it clean and easy to wrap with paper later. |
![]() |
The Filler is sitting quite nicely. No more air pockets in the surface but the edges do still have a bit of a lip. |
![]() |
Added 3rd round of filler. |
![]() |
![]() |
Inspiration and plan… Previous Part Next Part |
- SRAM Shift Lever Tuning
- SRAM Force RD Tuning
- Isaac Force Build
- Cleaning KCNC Calipers
- Tuning Campy Record FD's
- Addict Built
- Ruegamer Build
- Muriatic acid for broken posts
- Roll Out Dents
- Remove Seized Seatposts
- Remove Seized Stems
- Determine Your Bike Size
- Cranks & Bottom Brackets
- Quill Stem Basics
- Tune Derailers
- Tires and Tubes
- Remove Tight Fitting Tires
- Remove & Install Chains w.o. chain tool
- Cantilever Brakes
Featured Articles
