![]() |
Hi-E Rims as described on Velo-Pages: “213 grams - 2024T4 aluminum alloy sheet doubled on the inside and attached with hollow rivet eyelets - 20 mm section - box profile - smooth / non-machined braking surfaces… these remarkable rims were manufactured from flat sheet stock aluminum which was then extruded to form in much the same manner as modern seamless gutters are fabricated]” Source |
![]() |
Sure enough the weight is low. REAL low. I’m hoping my carbon KOM hoops come out this light and those were made around 2008.. whereas these HI-E’s were made in the 70s. |
- SRAM Shift Lever Tuning
- SRAM Force RD Tuning
- Isaac Force Build
- Cleaning KCNC Calipers
- Tuning Campy Record FD's
- Addict Built
- Ruegamer Build
- Muriatic acid for broken posts
- Roll Out Dents
- Remove Seized Seatposts
- Remove Seized Stems
- Determine Your Bike Size
- Cranks & Bottom Brackets
- Quill Stem Basics
- Tune Derailers
- Tires and Tubes
- Remove Tight Fitting Tires
- Remove & Install Chains w.o. chain tool
- Cantilever Brakes
Featured Articles
